Application Note

Bosch Sensortec

BlueBox Demo-Board for the digital sensors AN18002

SMB365 (acceleration) and SMD500 (pressure)

3 Quick-Start

Note: It is strongly recommended that the BST Sensor Desktop software is already installed on your PC before continuing with the following chapters.

3.1USB wire bound

1.Turn on the BlueBox demo board (Main Switch into the direction of the USB connector) o The demo board performs a self test indicated as a LED light up sequence

o LEDs in general from left to right:

-outer red: (flashes) battery warning

-yellow: (constant) continuous data transmission

-green: (constant) logic COM port connection

-yellow: (alternately flashes with green LED) searching COM port

-inner red: (constant) recharging battery

USB connector

LEDs

Main Switch

2. Connect the BlueBox to a free USB-Port on your PC

othe red LED on the board indicates: “recharging battery pack”, used for optional wireless operation, the green LED indicates “logic connection to COM port O.K.”

3.Execute the SensorDesktop software on the PC from Start\Programs\ SensorDesktop

Rev. 1.0

Page 17

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such copying and passing onto third parties.

7211RB11