Bosch Appliances SMB365 3.3.3Calibrate altitude manually

Application Note

Bosch Sensortec

BlueBox Demo-Board for the digital sensors AN18002

SMB365 (acceleration) and SMD500 (pressure)

3.3.3Calibrate altitude manually

This function applies to pressure measurements under a known and manually obtained altitude

1.Open Settings Æ Calibrate altitude

2.the following message box appears

ba

cd

3. Obtain actual altitude above sea level

oE.g. from map with altitude details, travel guide or internet

4.Choose corresponding unit [a]

5.Put in the altitude value [b]

6.Confirm with OK [c] or cancel [c] selection

Rev. 1.0 Page 24

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such copying and passing onto third parties.

7211RB11