Application Note

Bosch Sensortec

BlueBox Demo-Board for the digital sensors AN18002

SMB365 (acceleration) and SMD500 (pressure)

Settings Æ Measurements

According to customized settings (high signal resolution or low power consumption) it is possible to choose different sample averaging numbers and update rates. E.g. increasing the resolution leads to a decreased noise with increased power consumption and contrariwise. This behavior can be edited by the following:

4.Open Settings Æ Measurements

5.The following message box appears

6.Chose sampling average number and update rate according to the text

•sampling average number = Number of single values for avg. calculation o edit by mouse scroll

•update rate = time for a new “send data command”

oMinimum update rate 0.5 s

•sample rate = update rate / sampling average number

oMinimum sampling rate 0.1 s

oMaximum 2 values per second (2 Hz) possible

Rev. 1.0

Page 31

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such copying and passing onto third parties.

7211RB11