Application Note

Bosch Sensortec

BlueBox Demo-Board for the digital sensors AN18002

SMB365 (acceleration) and SMD500 (pressure)

3.3.1Calibrate at sea level via internet

This function applies to altitude measurements under a known sea level pressure obtained from the internet.

1.Open Settings Æ Calibrate at sea level

2.Chose “via internet tab” [a]

a

b

cd

ef

3.Connect the PC to the internet

4.Select the nearby location from the default list [b]

olocation in default list should be < 200 km off current location

oif current location is > 200 km in distance calibrate according chapter 3.3.2

5.Choose the unit [c]

6.Press “get pressure at sea level” [d] for pressure at sea level update

7.Confirm with OK [e] or cancel [f] selection

Rev. 1.0

Page 22

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such copying and passing onto third parties.

7211RB11