32 en | Installing the Monitor Full HD LCD Monitors
F.01U.172.600 | 1.0 | 2010.10 User’s Manual B osch Security Systems, Inc.
5.6 Connecting the PC Signal to the Monitor
There are three ways to connect the PC signal to the monitor:
HDMI, DVI, and VGA.

5.6.1 HDMI Connection

Connect an HDMI cable (user-supplied) to the HDMI input on
the bottom panel of the monitor.
Figure 5.6 HDMI Input

5.6.2 DVI Connection

Connect a DVI-D cable (supplied) to one of the DVI-D inputs on
the bottom panel of the monitor.
Figure 5.7 DVI Input

5.6.3 VGA Connection

You can connect a PC signal to the monitor using the VGA
connector on the rear panel and a VGA cable (D-SUB to D-SUB).
Figure 5.8 VGA Input
Pin Description Pin Description Pin Description
1 Red Video 6 Red Ground 11 Ground
2 Green Video 7 Green Ground 12 SDA (for DDC)
3 Blue Video 8 Blue Ground 13 H-Sync or H+V Sync
4Ground 9N/A 14V-Sync
5 Ground 10 Signal Cable Detect 15 SCL (for DDC)