![](/images/new-backgrounds/1131660/13166053x1.webp)
AutoDome Modular Camera SystemCommon AutoDome User Commands (unlocked) en 23
3 | Common AutoDome User Commands (unlocked) |
| This chapter details the commonly used BOSCH keyboard setup commands. See |
| Section 6: Keyboard Commands by Number on page 33 for a complete list of commands. |
3.1 | Setting AutoPan Mode |
| AutoPan mode pans a PTZ camera 360º or pans between user defined limits (when pro- |
| grammed). The PTZ camera continues to pan until stopped by moving the joystick. |
To pan 360º:
1.Press
2.Move the joystick to stop the pan.
To set left and right pan limits:
1.Move the camera to the starting position and press
2.Move the camera to the end position and press
To start
1. Press
2. Move the joystick to stop the pan.
3.2 Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms SHOT and SCENE are used interchangeably.
To set a Shot:
1.Move the camera to the position you want to save.
2.Press
To view a Shot:
XPress
To store or clear a Shot:
1. Press
2. Follow the
3.3 Configuring Preposition Tours
A Preposition Tour automatically moves the camera through a series of preset or saved shots. There are two (2) types of tours: a standard serial tour and a customized tour.
Tour 1 is a standard tour that moves the camera through a series of shots in the sequence they were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour by inserting and deleting scenes.
To start standard Tour 1:
1.Set a series of preset shots in the order that you want the AutoDome to cycle through.
2.Press
To stop a Tour:
XPress
Bosch Security Systems, Inc. | F01U064036 1.0 2007.01 |