![](/images/new-backgrounds/1131660/13166085x1.webp)
AutoDome Modular Camera SystemConfiguring and Using the IP AutoDome en 39
8 | Configuring and Using the IP AutoDome | ||
| The | ||
| module that allows the AutoDome to transmit PTZ control commands and images over a TCP/ | ||
| IP network. It also allows users to configure the AutoDome camera display settings, camera | ||
| operating settings, and to configure the network parameters. | ||
| The IP AutoDome incorporates a network video server in the IP module. The primary function | ||
| of the server is to encode video and control data for transmission over a TCP/IP network. With | ||
| its | ||
| video recorders and multiplexers. The use of existing networks means that integration with | ||
| CCTV systems or local networks can be achieved quickly and easily. Video images from a sin- | ||
| gle camera can be simultaneously received on several receivers. | ||
8.1 | Overview of Features | ||
| The IP module adds the following functionality to an AutoDome system: | ||
|
|
|
|
| Function | Description |
|
|
|
|
|
| Video encoding | The camera uses the |
|
|
| data rate remains low even with high image quality and can also be |
|
|
| adapted to local conditions within wide limits. |
|
|
|
|
|
| Dual Streaming | Encodes dual data streams simultaneously according to two individually |
|
|
| customized profiles. This feature creates two (2) data streams per camera |
|
|
| that can serve different purposes. For example, one (1) data stream for |
|
|
| local recording and one (1) data stream optimized for transmission over |
|
|
| the Local Area Network (LAN). |
|
|
|
|
|
| Multicast | Enables simultaneous, |
|
|
| network must implement the UDP and IGMP V2 protocols as a prerequi- |
|
|
| site for Multicasting. |
|
|
|
|
|
| Configuration | You can configure all camera settings from a Web browser on the local |
|
|
| network (Intranet) or on the Internet. You can also update the firmware, |
|
|
| load device configurations, store configuration settings, and copy these |
|
|
| settings from one camera to another. |
|
|
|
|
|
| Snapshots | Allows you to take and store individual video frames as JPEG images from |
|
|
| the Web browser interface. |
|
|
|
|
|
| Backup | You can save video images as a file on a computer’s hard drive from the |
|
|
| Web browser interface. |
|
|
|
|
|
| Audio | Allows you to set the gain level for the audio signal from the Line In 1, |
|
|
| Microphone, and the Line Out ports. |
|
|
|
|
|
| Record | Allows you to configure the recording options for the IP module. You can |
|
|
| record video from the Livepage to a hard drive or you can opt to store up |
|
|
| to 8 MB of video on the IP module. |
|
|
|
|
|
Bosch Security Systems, Inc. | F01U064036 1.0 2007.01 |