![](/images/new-backgrounds/1131660/13166055x1.webp)
24 en Common AutoDome User Commands (unlocked) | AutoDome Modular Camera System |
|
|
To add or remove scenes to standard Tour 1:
1.Press
2.Use the Focus/Iris buttons to add or remove the selected scene from the tour.
To start custom Tour 2:
XPress
To edit a custom Tour 2:
1. Press
2. Press the Focus/Iris buttons to add or remove the selected scene.
To change the dwell period of a tour:
1. Press
2. Select the tour (Tour 1 or Tour 2) and follow the
3.4 Programming the Inactivity Operation
You can program the AutoDome to automatically change its operating mode after a period of inactivity.
To access the Inactivity mode (locked command):
1.Press
2.Press ON-9-ENTER to access the Inactivity Mode Menu.
3.Select one of the following choices:
–Return to Scene 1: Returns the camera position back to the first scene saved in memory.
–Recall Previous Aux: Returns the camera to the previous operating mode, such as a Preposition Tour.
3.5 Recording Tours
The AutoDome can make up to two (2) recorded tours. A Recorded Tour saves all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds and other lens setting changes.
To record standard Tour A:
1.Press
2.Press
To playback standard Tour A:
1.Press
2.Press
To record custom Tour B:
1.Press
2.Press
To playback custom Tour B:
1.Press
2.Press
F01U064036 1.0 2007.01 | Bosch Security Systems, Inc. |