Bosch Appliances VG4-200, VG4-300 Pre-position Tour, To set up a scene with Motion Detection

38 en Advanced Features AutoDome Modular Camera System

i

NOTICE! Motion Detection always takes precedence over AutoTrack object tracking.

To set up a scene with Motion Detection:

1.Choose an unused Preset position from 90 to 99. For this example use Preset scene 95.

2.Enter the keyboard command SET-95-ENTER.

3.Select YES at the Apply Motion Detection? prompt. (If NO is selected, the Preset scene does not activate Motion Detection.)

4.Select YES at the Apply Region of Interest? prompt. (If NO is selected, the entire scene is used for Motion Detection.)

5.Follow the on-screen menu instructions to construct the shape of the screen area you want to detect motion within.

	i	NOTICE! Up to five (5) anchor points can be used to form the area which you want to detect
		motion within.
		NOTICE! Motion Detection is not activated until the Preset scene is recalled. The Motion
		Detection icon "M" appears in the upper left-hand corner of the display.
7.6		Pre-position Tour

The 300 and 500i Series AutoDomes feature two preset tours. Each scene is saved for play- back later.

Tour 1 is a standard tour that only recalls the scenes in the exact sequence they were shot. Scenes can be added or deleted on the tour, but the sequence can not be changed. To enter the Add/Remove Scenes on Tour 1 enter the keyboard command SHOT-900-ENTERand follow the on-screen instructions.

Tour 2 is a customizable tour that allows you to rearrange the sequence of scenes on the tour by inserting and deleting scenes. To enter the Edit Tour 2 menu, enter the keyboard command SET-900-ENTERand follow the on-screen instructions.

F01U064036 1.0 2007.01 VG4-200, VG4-300, VG4-500i Series User’s Manual Bosch Security Systems, Inc.