Bosch Appliances VG4-200, VG4-300 Setting Passwords, Special Passwords, Password Security Level

AutoDome Modular Camera System Getting Started en 5

4.Follow the on-screen instructions. You receive an on-screen confirmation when the FastAddress is complete.

To change or clear an address to a camera with an address:

1.Select the camera number you want to FastAddress. The system displays the camera number on the keyboard and the image on the corresponding monitor.

2.Press #-ENTER(where # is the camera number with an address).

3.Press ON-998-ENTERto invoke an on-screen display of all cameras on the system, with or without an address.

4.Follow the on screen instructions. You receive an on-screen confirmation when the FastAddress is complete.

	i	NOTICE! FastAddress is stored in nonvolatile memory and does not change if the power is
		turned off or if the default settings are restored.
1.4		Setting Passwords

Passwords are used to control access to locked command menus. Unlocked commands are available to all users. Passwords are four (4) digits in length.

1.4.1Special Passwords

Password	Security Level
0000 (default)	Enables security and requires a user to enter the unlock command
	OFF-90-ENTERbefore invoking a locked command.
9999	Disables all security and allows all users to access locked commands.

To set or change a password (locked command):

1.Press OFF-90-ENTERto turn off the command lock.

2.Press SET-802-ENTERto access the password menu.

3.Tilt the joystick up or down to choose a number. Tilt the joystick right to move to the next number position.

4.Follow the on-screen instructions and save the password. You receive an on-screen con- firmation.

Bosch Security Systems, Inc. VG4-200, VG4-300, VG4-500i Series User’s Manual F01U064036 1.0 2007.01