Bosch Appliances VG4-500I, VG4-200, VG4-300 Entering a Keyboard Control Command, Aux Control Tab

46 en Configuring and Using the IP AutoDome AutoDome Modular Camera System

8.5.4Entering a Keyboard Control Command

You use the Aux Control tab to enter keyboard control commands. These commands are com- posed of a command number plus the appropriate function key (Show Shot, Set Shot Aux On or Aux Off). A valid combination either issues a command to the camera or displays an on- screen menu.

Aux Control Tab

The Aux Control tab allows you to enter pre-programmed keyboard control commands. See Chapter 6: Keyboard Commands by Number on page 33 for a list of all commands. To access the Aux Control tab, navigate to the Livepage and click the Aux Control tab. The following fig- ure illustrates this tab:

1

2

67

3

4

5

8

Fig. 8.6 Aux Control Tab

Number	Description
1	Command number field
2	Keypad (numbers 0-9)
3	Show a preset shot
4	Set a preset shot
5	Initiates a command
6	Deletes a number in the Command Number field
7	Used to select a menu item
8	Stops a command

To Enter a Keyboard Control Command:

1.Place the cursor in the Command Number field.

2.Click the desired command number via the on-screen keypad.

3.Click either the Aux On or the Aux Off button to initiate or stop the command. See Chapter 6: Keyboard Commands by Number on page 33 for a list of commands.

4.If the command initiates a menu, use the Up/Down arrows on the View Control to navi- gate the menu. Click the OK button to select a menu item.

F01U064036 1.0 2007.01 VG4-200, VG4-300, VG4-500i Series User’s Manual Bosch Security Systems, Inc.