BM 2610956386 07-08 7/1/08 1:25 PM Page 10

FORWARD/REVERSING

 

FIG. 5

LEVER & TRIGGER LOCK

!WARNING After tool use, lock trigger in “OFF” position to help prevent

accidental starts and accidental discharge.

Your tool is equipped with a forward/ reversing lever and trigger lock located above the trigger (Fig. 5). This lever was designed for changing rotation of the bit, and for locking the trigger in an “OFF” position.

For forward rotation, (with chuck pointed away from you) move the lever to the far left.

For reverse rotation move the lever to the far right. To activate trigger lock move lever to the center off position.

!

CAUTION

Do not change direction of

rotation until the tool

 

 

comes to a complete stop. Shifting during rotation of the chuck can cause damage to the tool.

GEAR SHIFTING

Your tool is equipped with two separate gear ranges, low gear and high gear. Low gear provides high-torque and slower drilling speeds for heavy duty work or for driving screws. High gear provides faster speeds for drilling lighter work. To change speeds slide switch, to the high or low position (Fig. 6).

ATTENTION: If your tool appears to be running, but the chuck will not turn, check to make sure the gear shifting switch is pushed fully into desired setting.

ADJUSTABLE CLUTCH

Your tool features 21 clutch settings. Output torque will increase as the clutch ring, is

rotated from 1 to 20. The drill “ ” position will lock up the clutch to permit drilling and driving heavyduty work, and also enables bits to be changed quickly and easily in the keyless chuck (Fig. 6).

BRAKE

When the trigger switch is released it activates the brake to stop the chuck quickly.

FIG. 6

GEAR SHIFTER

ADJUSTABLE

CLUTCH

This is especially useful in the repetitive driving and removal of screws.

BIT STORAGE AREA

Your tool is equipped with a bit and storage area that is conveniently located in the handle base where it is always handy and unlikely to get lost or misplaced (Fig. 1).

INSERTING AND RELEASING BATTERY PACK

Set Forward/Reversing lever to the center (off position). Slide charged battery pack into the housing until the battery pack locks into position (Fig. 7).

Your tool is equipped with a secondary locking latch to prevent the battery pack from completely falling out of the handle, should it become loose due to vibration.

-10-

Page 9 Page 11
Page 10
Image 10
Bosch Power Tools 36614 manual FORWARD/REVERSING Lever & Trigger Lock, Gear Shifting, Brake, Gear Shifter Adjustable Clutch
Page 9 Page 11

36618, 36614 specifications

Bosch Power Tools has long been synonymous with quality, durability, and innovation in the realm of construction and home improvement. Among its standout offerings are the Bosch Power Tools 36614 and 36618 models, which exemplify the brand's commitment to providing reliable and efficient tools that meet the needs of both professionals and DIY enthusiasts.

The Bosch 36614 is a cordless drill/driver, powered by a high-performance 18V lithium-ion battery system. It features a compact and lightweight design, making it easy to maneuver in tight spaces or overhead applications. Its two-speed gear design offers versatility, allowing users to adjust speed and torque according to the task at hand. The 36614 is equipped with a 1/2-inch keyless chuck that enables fast and easy bit changes, enhancing productivity on the job site.

On the other hand, the Bosch 36618 is an upgrade that is designed for more demanding applications. This model incorporates advanced brushless motor technology, which provides greater efficiency and longer tool life. The brushless motor delivers an impressive amount of torque, significantly increasing the tool's power and performance, particularly in heavy-duty use cases. Like the 36614, the 36618 also boasts a two-speed gearbox and a keyless chuck, ensuring convenience and versatility.

Both models feature Bosch's Electronic Cell Protection (ECP), which helps prolong battery life by preventing overheating and over-discharging. The ergonomic design of these tools emphasizes user comfort, with a soft-grip handle that reduces strain during extended use. Additionally, integrated LED lights illuminate dark work areas, allowing for enhanced visibility and precision.

The versatility of the Bosch 36614 and 36618 is further highlighted by their compatibility with a wide variety of drill and drive bits, making them suitable for a range of materials including wood, metal, and masonry. Their robust construction ensures that they can withstand the rigors of daily use in various environments.

In summary, both the Bosch Power Tools 36614 and 36618 offer remarkable features and cutting-edge technologies. With their powerful performance, user-friendly designs, and advanced safety features, these tools are excellent choices for anyone seeking efficiency and reliability in their power tool arsenal. Whether you're a professional contractor or a home DIYer, Bosch continues to set a standard for performance and quality that is hard to beat.
Top Page Image Contents