Bose 135/235 535/525 Wall mounting the adapter, To mount the adapter

10 - English
Wall mounting the adapter
You can mount the adapter on a wall (hardware not included).
See “Mounting hardware specifications” for the correct hardware.
If the mounting hardware instructions differ from these instructions,
follow the mounting hardware instructions.
There are two ways to mount the adapter:
• Vertically; connector panel facing left
• Horizontally; connector panel facing up
To mount the adapter
1. Drill two holes 6¼ in. (159 mm) center-to-center.
2. Insert plastic wall anchors (if mounting to wallboard).
3. Install pan-head wood screws.
Note: Leave the screw heads ¼ in. (6.35 mm) above wall
surface.
4. Position adapter onto the screws.
Mounting hardware specifications
Item Wood Wallboard
Wall thickness 1 in. (25.4 mm) or thicker ⅜ in. (9.5 mm) or thicker
Drill bit⅛ in. (3.17 mm) ³/16 in. (4.76 mm)
Pan-head wood screws
(2) #8x1¼ in. (32 mm) #8x1¼ in. (32 mm)
Plastic wall anchors (2) Not used #6-8x1 in. (25.4 mm)
6¼ in. (159 mm)
center-to-center