Figure 12
Making the left and right speaker connections
System Setup
3.Plug the connector labeled LEFT into the jack on the rear of the left speaker (Figure 12).
4.Plug the connector labeled RIGHT into the rear jack on the right speaker.
RIGHT | LEFT |
English
Note: When properly inserted, there will be a small gap between the plug and the speaker panel.
Left and right speaker placement
For optimal audio surround effects, be sure to place the LEFT speaker to the left of the TV as you face it. Place the right speaker to the right of the TV as you face it (Figure 13).
Figure 13 |
|
Left and right speaker |
|
placement |
|
LEFT speaker | RIGHT speaker |
Connecting the Acoustimass® module
1.Locate the jack labeled MEDIA CENTER on the rear of the Acoustimass® module. Insert the
2.Locate the jack labeled ACOUSTIMASS MODULE on the rear panel of the media center. Insert the other end of the module cable into the ACOUSTIMASS MODULE jack.
3.Firmly tighten the two screws at each end of the module cable.
Figure 14
Connecting the Acoustimass module to the media center
| AUDIO INPUT |
| VIDEO | VIDEO | AUDIO | SPEAKERS | |
O |
| IDEO 2 | AUX | INPUT | OUTPUT | OUTPUT |
|
L | L | D | L | C | C | L |
|
R | R | D | R | S | S | R | ACOUSTIMASS MODULE |
| |||||||
AC INPUT
MEDIA CENTER
Acoustimass module cable
WARNING: Do not plug the Acoustimass module’s power cord into the wall outlet until all other system connections have been made.
AM271966_00_V.pdf August 18, 2003
15
