English
Controls, Displays, Menus
The advanced remote control (Supplied with the 3•2•1 GS system or the 3•2•1 system in Europe only)
If you purchased the 3•2•1 GS system, your system came with the advanced remote control which can be programmed to control your TV and/or cable/satellite box. To contact Bose for information on how to purchase the remote separately, refer to the address sheet included with the system.
Note: This remote functions as described on pages 26 and 27, with some additional features.
Menu buttons, described on the previous page, work similarly with the cable/satellite guide menu on your TV. However, the volume button on this remote does not affect the TV volume.
Enhanced controls
Switches the TV on or off.
Does not turn cable box or satellite box on or off.
Selects TV as the source.
Turns on and off the cable/satellite guide menu.
Exits the cable/satellite box’s displayed menu.
Returns to the TV or cable/satellite channel previously selected.
Enters the selected channel.
Changes the input selection on the TV.
Programs the advanced remote to control the TV and cable/satellite box.
Programming the advanced remote
Find the
Note: More than one code may work with your particular brand product. If you notice a lack of response or limited functionality after programming the remote, try a different code.
Note: If your advanced remote flashes rapidly several times during programming, an error has occurred. Wait 7 seconds for the remote to clear and begin programming again.
To control the TV
1.Turn on both the 3•2•1 system and your TV.
2.Press and hold the Program and TV On/Off buttons for 3 seconds. The remote Source buttons will light to signal that you have entered programming mode.
3.Enter your TV’s
4.Press Program once to complete programming. The remote will flash once to indicate successful programming. To confirm that, use the remote to change TV channels.
To control the cable/satellite box
1.Turn on both the 3•2•1 system and your cable/satellite box.
2.Press and hold the Program and Guide buttons for 3 seconds. The remote source buttons will light to signal that you have entered programming mode.
3.Enter your cable/satellite box’s
4.Press Program once to complete programming. The remote will flash once to indicate successful programming. To confirm that, use the remote to change cable channels.
28
AM271966_00_V.pdf August 18, 2003
