Bose 321GS manual Video as an alternate means to connect to the TV

English

System Setup

S-video as an alternate means to connect to the TV

An S-video input jack, provided on many TVs, delivers a higher-quality TV picture than the composite video output connection shown in Figure 16 on page 17.

To make this alternate connection, insert the end of an S-video cable from the TV into the S-VIDEO OUTPUT on the media center. This cable may be purchased from your Bose® dealer or a local electronics retailer.

Note: Some older TVs with standard TV cable connectors do not have a composite video or an S-video input. Such TVs are not compatible with any DVD players and require use of an RF modulator for this connection, which is available at your local electronics store.

Note: If you use S-video to connect your cable box to the media center, you must also use S-video to connect all other components (such as the TV and VCR) to the system.

Turning off the internal speakers in your TV

When you listen to TV audio through your 3•2•1 home entertainment system, the speakers in your TV should not be on. Use the on-screen menu on your TV to locate the setting for INTERNAL SPEAKERS and select OFF. (Refer to your TV owner’s guide for instructions).

Note: In some models, when the TV’s internal speakers are turned off, you may need to turn up the TV’s volume by 75% to 100% in order to hear audio from the 3•2•1 home entertainment system. (See your TV owner’s guide for details.)

If your TV does not have an option to turn off the internal speakers, reduce the volume on your TV to its lowest setting.

18

AM271966_00_V.pdf August 18, 2003