69
Chapter 11. Using a memory card
6
11
If no files have been saved, the display will indicate
“******”.
7. To load the data, press [F1] (EXECUTE).
To cancel, press [F2] (CANCEL).
8. Press [SONG] or [PTN] to return to the Play screen.
* When you load, the sample and sequencer data in internal
memory will be erased. Be sure to save important data on a
memory card before you load. (p. 67)
Never turn off the power while the display indicates
“Keep Power On!”
Deleting data from a memory card
Here’s how to delete sample or sequencer (pattern/song)
data from a memory card.
1. Press [SONG] or [PTN] to display the Play screen.
2. Press [SYSTEM] to display the System screen.
fig.10-01a
* It is not possible to display the System screen while a pattern
or song is playing.
3. Press [F3] (CARD).
4. Press [F2] (LOAD).
5. To delete sample data, press [F1] (SAMPLE). To delete
sequencer (pattern/song) data, press [F2] (SONG/PTN).
The file names of sample or sequencer files saved on the
memory card will be displayed.
If no files have been saved, the display will indicate
“******”.
fig.11-03b
6. Use the VALUE dial to select the file that you want to
delete.
7. Press [F3] (DELETE).
You will be asked to confirm that you really want to
delete the file.
fig.11-05
8. To delete, press [F1] (YES).
To cancel, press [F2] (NO).
9. Press [SONG] or [PTN] to return to the Play screen.
Never turn off the power while the display indicates
“Keep Power On!”
Loading WAV/AIFF files into the SP-505
Standard waveform data (WAV/AIFF files) saved on a
memory card can be loaded into the SP-505.
* Before you continue, save the WAV/AIFF files from your
computer onto a memory card.
1. With the power of the SP-505 turned off, insert the
memory card into the memory card slot, then turn on
the power switch.
2. Press [SYSTEM] to display the System screen.
fig.10-01a
* It is not possible to display the System screen while a pattern
or song is playing.
3. Press [F3] (CARD).
* If a memory card is not inserted, “CARD” will not appear
above [F3].
4. Press [F2] (LOAD).
* If the memory card has been formatted in a format that cannot
be read by the SP-505, “LOAD” will not appear above [F2].
Please format the card. (p. 66)