78
Chapter 15. Appendices
Error message list
■Sampling related
Memory Full!
❍Sampling is not possible because there is no space in
user memory.
→Delete unneeded sample data. (p. 49)
❍Ran out of user memory during sampling.
→Delete unneeded sample data. (p. 49)
❍Not enough memory to use the Chop function.
→Delete unneeded sample data. (p. 49)
❍Not enough memory to use the Scale function.
→Delete unneeded sample data. (p. 49)
Awaiting Digital Signal
❍You are attempting to sample the signal from
DIGITAL IN, no signal is detected.
→Check whether a digital signal is being output from the
connected digital device. (For details, refer to the manual
for the connected device.)
❍The sampling frequency of the signal from DIGITAL
IN is not 44.1 kHz.
→Set the sampling frequency to 44.1 kHz. (For details refer
to the manual of the connected device.)
Not Sampling Bank!
❍Sampling is not possible since the Chop bank or the
Pitch bank is selected.
→Switch to another pad bank.
Protected!
❍Deletion is not possible because the sample is
protected.
→Turn off the protect setting of the sample. (p. 73)
❍Overwriting is not possible because the sample is
protected.
→Turn off the protect setting of the sample. (p. 73)
Protected! Sure?
❍Initialization is not possible because the sample is
protected.
→To continue with initialization, press [F1] (YES).
To cancel, press [F2] (NO).
Too Busy
❍Notes are not sounded in time.
→Reduce the number of notes.
■MIDI related
MIDI Off Line!
❍There is a problem with the MIDI cable connection.
→Check whether the MIDI cable has been disconnected or
broken.
MIDI Buffer Full!
❍Too many MIDI messages were received all at once,
and the SP-505 was unable to process all of them.
→Reduce the amount of MIDI messages being transmitted
to the SP-505.
MIDI Error!
❍A MIDI message was not received correctly.
→Check whether the MIDI cable has been disconnected or
broken.
→Check whether invalid MIDI messages are being
transmitted.
■Song/pattern recording related
Memory Full!
❍Song/pattern cannot be saved because there is
insufficient space in user memory.
→Delete unneeded songs or patterns.
Too Much Data!
❍Recording/playback is not possible because there is too
much performance data, or because the BPM is too fast.
→Lower the BPM. Delete unneeded performance data.
Pattern REC Full!
❍No more data can be recorded in the pattern, since the
maximum number of notes that can be recorded has
been exceeded.
→Delete unneeded data from the pattern being recorded.
(p. 59, 60)