Store compressor in a vertical or horzitional position.

FIG. 3B

A

B

A

B

PREPARATION FOR USE

Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions.

PRE-START CHECKLIST (FIG. 1)

1.Ensure the Auto/Off switch (L) is in the OFF position.

2.Plug the power cord into the correct branch circuit receptacle. See Voltage and Circuit Protection under Installation.

3.Ensure air tank is drained, see Draining Air Tank under Maintenance.

4.Ensure the drain valve (M) is closed.

5.Ensure safety valve (G) is functioning properly, see Checking Safety Valve (G) under

Maintenance.

6.Pull the regulator knob (F) out and turn counterclockwise until fully closed. Ensure Regulated Pressure Gauge (D) reads 0 psi. Push knob in to lock in place.

7.Attach hose and accessories. NOTE: Always use a minimum 3/8" (9.5 mm) or greater air hose rated at 300 psi.

Risk of unsafe operation. Firmly grasp air hose in hand when installing or disconnecting to prevent hose whip.

Risk of unsafe operation. Do not use damaged or worn accessories.

Risk of Bursting. Too much air pressure causes a hazardous risk of bursting.

Check the manufacturer’s maximum pressure rating for air tools and accessories. The Regulator

(F)outlet pressure setting must never exceed the maximum pressure rating of the tool or accessory.

OPERATING PROCEDURES

START-UP (FIG. 1)

1.Follow Pre-Start Checklist under Preparation for Use.

Risk of property damage. Do not operate in vertical position. Vertical position is for storage only.

2. Move the Auto/Off switch to the AUTO position and allow tank pressure to build. Motor will

stop when tank pressure reaches cut‑out pressure.

Risk of unsafe operation. Compressed air from the unit may contain water­ con- densation and oil mist. Do not spray un­filtered­ air at an item that could be damaged by moisture. Some air oper­ated­ tools or devic­es­ may require filtered air. Read the instruc­tions­ for the air tool or device.

3. Adjust regulator (F) to desired setting. See Regulator under Features.

SHUT-DOWN (FIG. 1)

1.Move Auto/Off switch (L) to the OFF position. NOTE: If finished using compressor, follow Steps 2–6.

NOTE: When the unit has been turned off, it is normal to hear a short hiss of air being released.

NOTE: Unplug unit when not in use.

2.Pull the regulator knob (F) out and turn counterclockwise until fully closed. Ensure regulated pressure gauge reads 0 psi. Push knob in to lock in place.

11

Page 10 Page 12
Page 11
Image 11
Bostitch CAP1645-OF owner manual Preparation for USE, PRE-START Checklist FIG, Start-Up Fig, Shut-Down Fig
Page 10 Page 12

CAP1645-OF specifications

The Bostitch CAP1645-OF is a robust and efficient air compressor designed for a variety of applications, including construction, woodworking, and home improvement projects. As a lightweight and portable unit, it packs a powerful punch while making it easy for users to transport and maneuver in different settings.

One of the standout features of the CAP1645-OF is its oil-free pump technology. This innovation eliminates the need for regular maintenance associated with oil-lubricated compressors, making it an ideal choice for DIY enthusiasts and professionals alike. This oil-free design not only reduces the upkeep but also allows for cleaner air output, making it suitable for indoor use without worrying about oil stains or residue.

The unit is equipped with a powerful 1.6 horsepower motor that delivers a maximum pressure of 145 PSI, providing a reliable source of air for various pneumatic tools. This high-pressure capability ensures that users can tackle a range of tasks, from inflating tires and powering nailers to running air tools efficiently. The CAP1645-OF features a 6-gallon pancake-style tank, which enhances stability during operation and allows for efficient air storage.

Moreover, the compressor boasts an impressive recovery time, ensuring that users do not have to wait long between tasks. The low noise level is another notable characteristic; the CAP1645-OF operates at around 78.5 dBA, making it one of the quieter options in its class. This feature is particularly beneficial in environments where noise reduction is necessary, such as residential neighborhoods.

The design of the compressor includes user-friendly controls, making it easy to adjust the pressure settings. The integrated handle and rubber feet enhance portability and stability, respectively. Additionally, the quick-connect air fitting allows for swift tool changes, ensuring that users can maximize productivity without the hassle of fumbling with connections.

Overall, the Bostitch CAP1645-OF stands out for its blend of performance, portability, and user-friendly features. With its oil-free technology, robust motor, and quiet operation, it represents a reliable choice for both professionals and DIY enthusiasts looking to accomplish their air-powered tasks effectively. Whether you are framing, roofing, or simply inflating, the CAP1645-OF is well-equipped to meet your needs.
Top Page Image Contents