Bowflex 001-7057 manual Assemble Leg Extension, End Caps Box 4 Hardware Card

Assembly

27

Step 24 Assemble Leg Extension

Parts:

•Foam Roller Pads Pad (Box 4)

•Roller Tubes (Box 4)

•Leg Extension Assembly (Box 4)

•End Caps (Box 4 Hardware Card)

•Leg Extension Pin (Box 4 Hardware Card)

24-1Slide the Roller Tubes through the holes in the Leg Extension Assembly followed by the Roller Pads and End Caps.

Roller Pad

Leg Extension Pin

Leg Extension Assembly

Roller Tube

24-1Place the Leg Extension Pin through Leg Extension	Pivot Tube
Assembly and Pivot Tube.

Install the Leg Extension Assembly by pulling down on the Pop-Pin under the Seat and inserting the Leg Extension into the bracket. Slide the Leg extension to the desired position and screw the Pop-Pin tightly into place.

Leg Extension Assembly

Seat Pad

Pop-Pin

End Cap