Bowflex 001-7057 manual Tighten Tension Shaft Holder

18

Assembly

Step 13 Tighten Tension Shaft Holder

Tools:

• 7/32” Allen Wrench

13-1Use a 7/32” Allen Wrench to tighten the Tension Shaft Holder by tightening the screws in numerical order shown on the tensioner. Tighten the two screws marked 1, then the two marked 2, etc.

Note: Do not replace Top Cover at this time.

Tension screws

Tighten screws in order

1&1 , 2&2, 3&3, then

4&4.

Tension Shaft Holder