SETTING UP THE PROJECTOR
1Place the projector on a flat surface.
•The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer.
•If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 28 to reverse the image.
•If you are installing the projector on the ceiling, refer to the installation guide that comes with the Ceiling Mount Kit for more information. To turn the image upside down, see “Ceiling Projection” on page 27. The Ceiling Mount Kit is sold separately, see “Optional Accessories” on page 43.
2Position the projector the desired distance from the screen.
•The distance from the lens of the projector to the screen and the zoom setting determine the size of the projected image. Figure 3 shows three projected image sizes. For more infor- mation about image size, see “Projected Image Size” on page 50.
1 0 f t . 3 , 0 5 m
| 6 |
|
| f |
|
2 | t |
|
. |
| |
. | 1 |
|
5 | , |
|
f | 8 |
|
t | m |
|
. |
| |
0 |
| |
| , |
|
| 7 |
|
| 6 |
|
| m |
|
|
| 20 ft. |
| 5 ft. | 12 ft. |
| 6,1 m | |
| 1,5 m | 3,66 m |
|
| |
FIGURE 3
Projected image size at minimum zoom
3 Make sure the projector and the computer are turned off.
NOTE: The projector must be at
least 5 feet (1.5 m) from the pro-
jection screen.
7
