S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
NOTE: To maximize lamp life,
allow the projector to run for at
least five minutes before turning
it off.
Turning Off the Projector
If you want to turn off the projector for a short period of time, press the standby button on the keypad or remote. This blanks the screen for fifteen minutes, but keeps the projector running. (You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 27 for details.) After 15 min- utes, the lamp goes out (the projector keeps running). To exit standby mode, press the standby button again. (It may take sev- eral seconds for the projection lamp to reach full power and project the image again.)
To completely power off the projector, press the Power button. If you want to turn the lamp back on immediately, you must allow about a minute for the lamp to cool. The lamp won’t light if it’s too hot.
14
