U s i n g | t h e | P r o j e c t o r |
|
|
|
NOTE: Some screen savers interfere with the operation of Auto Image. If you’re experiencing problems, try turning your screen saver off, then turning Auto Image off and back on.
NOTE: When you connect an HDTV source, the projector automatically displays the image in 16x9 format.
24
Image Menu
Display Audio | > Image > | Controls | Language Status | ||
|
| Keystone |
|
| |
|
| Overscan | on |
| |
|
| Auto image | on |
| |
|
| Resize | on |
| |
|
| Manual sync |
|
| |
|
| Manual tracking |
|
| |
|
| Horizontal position |
| ||
|
| Vertical position |
|
| |
|
|
|
|
|
|
FIGURE 16
Image menu
Keystone
This option helps to keep the image square as the angle of projec- tion is changed. To adjust the keystone, highlight Keystone, then click the left or right mouse button. This option is available for computer sources displaying their native resolutions only, SVGA 800x600 for the
Overscan
This option crops all the edges of the image to remove noise gen- erated on the edges by your source. This option is available for video sources only.
Auto Image
The projector automatically adjusts tracking, signal synchroniza- tion and vertical and horizontal position for most analog comput- ers (Auto Image does not apply to video sources or digital computer sources). If you want to adjust these features manually, you must turn off Auto Image first by highlighting Auto Image in the Image menu and clicking the left or right mouse button to select “off”.
Resize
This option works differently for computer and video sources. For computer sources, Resize automatically resizes the image by scaling it up or down. It only affects computer images that are not the projector’s native resolution. When Resize is on, the projector makes the best fit of the image to the computer screen. If you turn Resize off (by highlighting it in the Image menu and clicking the left or right mouse button to select “off”), the image may be either cropped or too small for the screen.
