Bradford-White Corp BWCV warranty Appliance Maintenance and Component Description

Internet Version for Reference Only

Copper Brute II Page 31

6.Low water cutoffs, if installed, should be checked every 6 months. Float type low water

cutoff should be flushed periodically.

7. Inspect flue passages, and clean with brushes/ vacuums, if necessary. Sooting in flue passages indicates improper combustion. Determine the cause and correct.

8.Inspect the vent system and air intake system,

and if the vent system is Category III, ensure that all joints are sealed properly. If joints need to be resealed, completely remove existing sealing material, and clean with alcohol. Apply new sealing material, and re-assemble.

7.2 Appliance Maintenance and

Component Description

Only genuine Bradford White replacement parts should be used.

Caution

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

See Figures 16 and 17 for location of gas train and control components.

Figure 16. Typical Gas Train Configuration.

Figure 17. Typical Control Panel.