Bradley Smoker CRS-2/IR, CRS-3/IR Install the Optional Soap Dispenser, Install the top cover

	Express® Crescent® Lavatory System - CRS-Series
Installation Instructions	CRS-2/IR, CRS-3/IR

Installation Instructions continued . . .

Step 9: Install the Optional Soap Dispenser

For Express® Crescent® Lavatory System units with optional soap dispensers, see 215-1583.

Step 10: Install the top cover

1.Carefully place the top cover on top of the lavatory system bowl.

2.Install the threaded rods into the holes on the bottom of the top cover (see Figure 3 on page 5).

3.Slide the anchor plate onto the threaded rods and secure anchor plate against bowl using the wing nuts provided.

4.OPTIONAL SOAP DISPENSER: Install soap filler assembly in mounting bracket previously installed. Tighten the optional soap filler cap nut with a spanner wrench.

Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07 9