Unpacking and Inspection

Inspect the printer for possible damage incurred during shipment.

νCheck all exterior surfaces.

νRaise the media access door and inspect the media compartment. In case shipping is required, save the carton and all packing material.

Reporting Damage

If you discover shipping damage:

νImmediately notify and file a damage report with the shipping company. Brady USA, Inc. is not responsible for any damage incurred during shipment of the equipment and will not repair this damage under warranty.

νKeep the carton and all packing material for inspection.

νNotify your local Brady distributor.

Storage and Reshipping

If you are not placing the printer into operation immediately, repackage it using the original packing materials. The printer may be stored under the following conditions:

νTemperature: -4° to +140° F (-20° to +60° C)

νRelative humidity: 5 to 85% non-condensing

To ship the printer, carefully pack it in a suitable container to avoid damage during transit. Whenever possible, use the original container from the factory. If you use a different container, package the printer carefully to avoid damage. Brady will not be responsible for shipping damage incurred due to improper packaging!

CAUTION! When packaging the printer in a rigid container, use shock mounts or shock-absorbing packing material to prevent damage to the printer. Before packing, remove all ribbon and media from the supply and

2

Brady X-PLUSSeries User’s Guide