PAUSE Key Self Test

This self test can be used to provide the test labels required when making adjustments to the printer’s mechanical assemblies. See the sample printout in Figure 34.

1.Turn off the printer.

2.Press and hold the PAUSE key while turning on the power.

νThe initial self test prints 15 labels at 2.4"/61 mm per second

(1”/25.4 mm for the 600X-PLUS) per second, then automatically pauses the printer. Each time the PAUSE key is pressed, an additional 15 labels print.

νWhile the printer is paused, pressing the CANCEL key alters the self test. Now each time the PAUSE key is pressed the printer prints 15 labels at 6"/152 mm per second (4”/102 mm for the 600X-PLUS).

νWhile the printer is paused, pressing the CANCEL key again alters the self test again. Each time the PAUSE key is pressed the printer prints 50 labels at 2.4”/61 mm per second (1”/25.4 mm for the 600X-PLUS).

νWhile the printer is paused, pressing the CANCEL key again alters the self test a third time. Now each time the PAUSE key is pressed the printer prints 50 labels at 6”/152 mm per second (4”/102 mm for the 600X-PLUS).

νWhile the printer is paused, pressing the CANCEL key again alters the self test a fourth time. Each time the PAUSE key is pressed the printer prints 15 labels at the printer’s maximum speed.

νTo exit this self test at any time, press and hold the CANCEL key.

Figure 34

Brady X-PLUSSeries User’s Guide

83