FEED Key Self Test
See Figure 35.
1.Turn off the printer.
2.Press and hold the FEED key while turning on the power.
The FEED key self test prints out at various darkness settings above and below that of the darkness value shown on the configuration label. Look at these labels and determine which one has the best darkness setting for your application. This
value can be entered intoFigure 35 the printer by setting the
darkness during the configuration procedure. Refer to page 46 for more information.
The value printed on that label is added to (plus) or subtracted from (minus) the darkness value specified on the configuration label. The resulting numeric value (0 to 30) is the best darkness value for that specific media/ribbon combination.
84 | Brady |