Braun 604XD Read warning posted above, To Manually Move Platform Out Extend From Stow Position

Manual Operating Instructions

WARNING

Push T-handle in fully and manually move platform in and out to engage platform lock before driving vehicle. Failure to lock platform may result in unintended platform deployment. Unintended platform deployment may result in serious bodily injury and/or property damage.

Note: The lift platform must be pushed back into its carriage compartment at least half-way before reverting back to normal (powered) operation. When the lift is fully extended manually, it does not activate the proper switches for normal operation. Returning (moving) the lift at least half-way in allows for proper switch activation.

Note: Before manually raising or lowering platform, be sure to reengage the release cable mechanism by loosening (turning) the “T” handle and pushing inward. Failure to place “T” handle in the original IN position will allow the platform to move in

and out when trying to raise or lower the platform with the hand pump.

Sales Representative: Instruct and demonstrate the proper re- engagement procedure of the manual release for all new UVL owners at the point of sale or delivery. Remind the consumer of proper engagement procedures when giving telephone instructions.

Step-by-step instructions for manually moving the platform in and out, manually raising and lowering the platform and manually lowering (unfolding) the outboard roll stop are provided on the following pages.

Platform Carriage Assembly Drive Chain Reengagement Procedure:

After manually moving the	Read warning posted above!
platform in or out:

1

1.Turn (loosen) the manual release “T” handle.

2.Push the “T” handle in fully (until handle bottoms out against its mounting bracket).

3. Grasp the outer roll stop and move the platform in and out until the platform locks (chain release assembly engages), securing the platform carriage assembly within the housing. You will feel the release mechanism engage.

2

				TURN
					TO
				LOCK
			WA
					RNIN
							G
Push T-
manuallyand handle					in
lock	out					fully and
			tomove
Failurebeforeengageplatform								in
result		to		lockdriving
		in
platformdeployment.						platform
						vehicle.
					platform			may
result in unintended
and/or							platform
			seriousdeploymentUnintended
		property					may
	Do					bodily
			not			damage.injury
					remove!				81823

To Manually Move Platform Out (Extend) From Stow Position:

1.Pull the “T” handle release cable outward.

2.Turn the “T” handle to lock platform into the released position.

3.Carefully pull the platform out to desired position.

Read warning posted above! Before raising or lowering the

platform, be sure to lock the1 platform. Reengage the release

cable mechanism by loosening (turning) the “T” handle and pushing inward. Failure to place “T” handle in the original IN position (lock platform) will cause the platform to move in and out when trying to raise or lower the platform with the hand pump.

						2
				T
					URN
					TO
				LOCK
			WA
					RNIN
							G
Push T-
manuallyand handle					in
lock	out					fully and
			tomove
Failurebeforeengageplatform								in
result		to		lockdriving
		in
platformdeployment.						platform
					platform			may
result in unintended
						vehicle.
			seriousdeploymentUnintended
and/or		property					platform
							may
	Do					bodily
			not			damage.injury
					remove!				81823

Page 16