Lift Terminology
UVL®850 Series Lift Terminology Illustration
Lift Mounting | Inboard | Right |
Brackets (4) |
|
|
Chain Drive |
|
|
Motor | Left | Outboard |
Hydraulic |
|
|
Cylinder |
|
|
Lift Housing | Inboard Roll Stop |
|
Hand Pump |
| |
(Bridge Plate) |
| |
(inside cover) |
| |
|
| |
|
| Manual Fold |
|
| “U” Handrails |
|
| with Shields |
|
|
| Roll Stop |
|
| Rolling | Actuator |
|
|
| |
Pump | Horizontal |
| |
Module | Arms |
| |
| Attendant's |
|
|
| Control Box |
| Platform |
| Platform |
| |
| Manual Release System |
| |
|
| Lifting Arms | Outboard |
|
| Roll Stop | |
|
|
| |
Lift Terminology Description
The UVL Lift Series includes three classifications of lifts (UVL600 Series, UVL600X Series and UVL850 Series). Refer to the illustrations on pages 2 and 3 for the visual differences in lift configurations and identification of lift components.
UVL600 Series lift models are consumer oriented (intended for operation by the wheelchair passenger). UVL600X lift models are commercial oriented and ADA compliant (intended for operation by an attendant). UVL600 Series and UVL600X lift platforms raise and lower with an “arcing” motion. UVL600 Series lifts offer a variety of options including bridge plates (inboard roll stops) and handrails.
UVL850 Series lifts are commer-
cial oriented, ADA compliant and designed for use in vehicles with increased
UVL lift models provide fully automatic operation of all lift functions as well as optional automatic door operators (if so equipped). Basic lift operation procedures are identical for all UVL Series lift models. The operating instructions contained in this manual address the lift control switches and the corre- sponding lift functions. Separate instructions are provided for operation of manual bridge plates (inboard roll stops) and handrails (stationary and folding) that may
be present on your particular lift model. Instructions are provided for manual operation of the lift in event of power or equipment failure.
Terminology: Become familiar with the terminology that will be used throughout this manual.
Become familiar with the identifi- cation of lift components and their functions.
Direction:
The terms "left," "right," "inboard," and "outboard" will be used throughout this manual to indicate direction (as viewed from outside the vehicle looking directly at the lift outboard roll stop). Refer to the Lift Terminology Illustrations for clarification of direction terms.
Page 3
