Pre-Lift Operation Notes and Details
the latch foot contacts the ground (latch raises above the roll stop).
Outboard Roll Stop and Roll Stop Latch Operation: The operator (attendant) must press the DOWN switch to lower the platform fully to the ground. The attendant must view the
WARNING
platform as it lowers to be certain the entire platform reaches and rests safely on the ground (see photo below). Stop pressing the DOWN switch if any portion of the platform is obstructed while descending or the entire platform does not reach ground level for any reason (contact with an ob-
struction, mechanical failure, exceeding the lift
After the platform is fully low- ered (entire platform reaches ground level), the attendant should continue to press the
Discontinue lift use immediately if any lift component does not operate properly. Failure to do so may result in serious bodily injury and/or
property damage.
The attendant must view the platform as it lowers to be certain the entire platform reaches and rests safely on the ground.
Page 19
