Braun L200UARS manual Operation is not required for this roll stop

Pre-Lift Operation Notes and Details

there is a smooth (level) transi- tion between the platform, the bridge plate assembly and the vehicle floor. See Floor Level Positioning on page 22.

Inboard Roll Stop: L211UARS Series lift platforms are equipped with a fixed 1" inboard roll stop (shown below). Attendant

operation is not required for this roll stop.

Automatic Outboard Roll Stop: The automatic cylinder- powered chain-driven roll stop provides a ramp for wheelchair loading and unloading at ground level. When the platform lowers fully to ground level, the gas

spring automatically unfolds (rotates) the roll stop to the ramp position (fully unfolded). Note: Outboard roll stop photos on following page.

Although the outboard roll stop is lift-powered, the activation of the roll stop is controlled by the lift operator (attendant). Press

Inboard Roll Stop

L211UARS Series

Lift Models only

WARNING

Discontinue lift use immediately if any lift component does not operate properly. Failure to do so may result in serious bodily injury and/or property damage.

Page 17