WARNING
Decals and Antiskid
Decals
Replace missing, worn or illegible decals. Failure to do so may result in serious bodily injury and/or property damage.
Note: Clean surfaces with
The lift is only as safe as the operator. Replace any missing, worn or illegible decals! Part numbers are provided for decals. Inspect your lift for missing, worn or illegible decals. Call
25857
WARNING
•Read manual before operating lift.
•Load and unload on level surface only.
•Engage vehicle brake before operating lift.
•Provide adequate clearance outside of vehicle to accommodate lift.
•Do not operate lift if you suspect lift damage, wear or any abnormal condition.
•Keep operator and bystanders clear of area in which lift operates.
Whenever a wheelchair passenger is on the platform, the:
•Passenger must be positioned fully inside yellow boundaries
•Wheelchair brakes must be locked
•Roll stop(s) must be up
Failure to follow these rules may result in serious bodily injury and/or property damage.
LIFT OPERATING INSTRUCTIONS
OPEN DOOR(S) AND SECURE
19342
OPERATING
INSTRUCTIONS
Read warnings and operate lift as outlined on LIFT OPERATING INSTRUCTIONS decal. Lift operating instructions apply to wheelchair passengers and standees.
Standee Instructions: Standees must stand at center of platform (fully inside yellow boundaries), grip handrails and lower head to clear door jamb header.
Interlock Instructions: Lift Interlocks vary in type and operation. Interlock (if equipped) must be operated as instructed by transit authority.
19342
18118
MANUAL INSTRUCTIONS
isopropyl alcohol before decal or antiskid application. Use a clean cloth or paper towels. Do not use oily shop rags. Wipe surface free of residue with dry portion of cleaning cloth.
See Decals on page 42 also.
25674
WARNING
O |
|
per | |
Ma | nuator's |
| al |
Read manual before operating lift. Call
and/or property damage. Keep manual in lift pouch.
25674
20620
MANUAL UNFOLD INSTRUCTIONS
3
2
4
5
1
1.Disconnect black connectors.
2.Pull detent pin from handle.
3.Pull handle down.
4.Remove hairpin cotter.
5.Support platform and pull actuator pin.
6.Unfold platform.
Note: Read manual for FOLD (IN) procedure.
20620
TO UNFOLD PLATFORM:
Stand clear and press UNFOLD switch until platform stops (reaches floor level).
TO UNLOAD PASSENGER:
1.Load passenger onto platform and lock wheelchair brakes.
2.Press DOWN switch until the entire platform reaches ground level. Release switch.
3.Press DOWN switch until roll stop unfolds fully.
4.Unlock wheelchair brakes and unload passenger from platform.
TO LOAD PASSENGER:
1.Load passenger onto platform and lock wheelchair brakes.
2.Press UP switch to fold roll stop fully. Release switch.
3.Press UP switch until platform stops (reaches floor level). Release switch.
4.Unlock wheelchair brakes and unload passenger from platform.
TO FOLD PLATFORM:
Press FOLD switch until platform stops. Release switch.
CLOSE DOOR(S)
20271 U.S. Patent No. 5,261,779
HAND PUMP
TO UNLOAD PASSENGER:
1.TO UNFOLD PLATFORM (OUT):
Follow the MANUAL UNFOLD INSTRUCTIONS posted on the fold actuator.
2.DOWN (TO LOWER):
Use hand pump handle to open (turn) hand pump valve counterclockwise (open 1/2 turn only).
TO LOAD PASSENGER:
1.UP (TO RAISE):
Using hand pump handle:
a.Close hand pump valve clockwise.
b.Insert handle in pump and stroke.
2.TO FOLD PLATFORM (IN):
Removal of actuator is required. Read manual for details.
|
|
| HAND PUMP |
|
|
| L | VALVE |
|
N |
| C |
|
|
| O |
|
| |
E |
|
|
| |
P |
| S | Close valve | |
O |
| E | ||
|
|
| before operating | |
|
|
| electric pump. |
18118
Page 41