Introduction
L200UARS Series lifts are commercial oriented (intended for operation by an attendant). The L200UARS Lift Series includes many standard lift models that vary in height and width. A standard L211UARS Series lift model is depicted in the Lift Terminology Illustration. Lift model numbers indicate lift dimensions. Model numbers of special order (nonstandard) lifts include other identification information exclusive to specific applications.
Lift operation procedures are the same for all L200UARS Series lift models. The operating instruc- tions contained in this manual and posted on the lift address the
Lift Terminology
lift control switches and the corresponding lift functions only. Instructions are provided for manual operation of the lift in event of power or equipment failure.
L200UARS Series lifts are installed in various types of transit vehicles with varying lift access door configurations. The attendant must become familiar with the proper operation of the lift as well as the vehicle lift door system and the lift interlock system (if equipped). It is the responsibility of the lift operator (attendant) to properly open, secure and close the vehicle lift door(s), to activate the lift inter- lock (if equipped), to load and unload the wheelchair passenger (or standee) on and off the
platform, and to properly activate all lift functions.
Terminology: Become familiar with the terminology that will be used throughout this manual.
Become familiar with the identifi- cation of lift components and their functions. Contact your lift sales representative or call The Braun Corporation at
Direction: The terms "left (rear)," "right (front)," "inboard," and "outboard" will be used throughout this manual to indi- cate direction (as viewed from outside the vehicle looking directly at the lift). Refer to the Lift Terminology Illustrations for clarification of direction terms.
Page 3
