Step2
Remove the Packaging
Step3
Check
Installation
Hardware
Installation
36" Island Vent Hood
The vent hood is packed separate from the required accessory ZX858, ZX859 or ZX8510.
•Remove the frame, cover, parts box, side bars and packaging.
•Remove junction box cover.
•Install strain relief onto junction box cover.
Locate the hardware accessory box packed with the hood and check contents.
4 Flat Washers |
|
| |
4 Hex head | 8 Frame Attachment |
| |
Screws with Washers |
| ||
wood lag screws | Front of Hood | ||
(attached to | |||
(6mm x |
| ||
accessory support |
| ||
or |
| ||
frames) |
| ||
(1/4 x |
| ||
|
| ||
2 Phillips Head |
| Template | |
Decorative Screws | 4 (10mm) Nuts and Lock Washers | ||
|
2 Side Bars With 4 Machine Screws
| Check service manual envelope taped |
| to the front on the hood to be sure it |
| contains one stop screw. Leave this |
3 Filters | screw in the envelope. |
|
Check contents of the required accessory, ZX858, ZX859 or ZX8510.
Mounting Screw Holes
Support Frames with 8 Screws and 8 Washers
Decorative Duct Covers
8