Installation
36" Island Vent Hood
Step6
Secure Wiring
Wiring
•Route house wiring through the ceiling hole and pull a length to reach the hood junction box, approximately 6” below the support.
•Tape the wire to the front of the frame support to prevent damage during installa- tion and service.
Ceiling
Front Side
Support
Frames
Tape
House Wiring
Step7
Size And
Install
Ductwork
To Find Required Duct Length:
•Measure from house duct flange to bottom of support frame. (Dimension A)
–Add at least 1” to Dim. A for duct overlap at the top.
–Subtract
•Cut the 6” duct to required length.
Note: The bottom of the duct must be external (female) connection to the top of the hood. The bottom end should be flared slightly, to facilitate installation of the hood.
•Install duct up through support frames and attach to house ducting with sheet metal screws.
•Seal the connection with duct tape.
Ceiling
House Duct
Side |
|
| Required |
View |
| Duct | Duct |
Support | Dim. A |
| Length |
Frame |
| ||
|
|
|
Duct Connection
To Hood
Bottom Support
Frame Flange
10