Step12
Install
Filters
Step13
Finalize Installation
Installation
36" Island Vent Hood
Lower Filter
Slots
•Remove protective film on filters.
•Tip the filter into the lower slots at the rear of the opening. Lift the filter and pull the knob forward until the filter rests on the slots.
•To remove the filters, grasp the knob, push the filter towards the rear and tilt down- wards.
•Remove the protective film covering the control panel on the front face of the hood, and any other packaging materials.
•Check all 4 lamps to assure tightness in sockets.
•Refer to the Use and Care book for operating instructions.
14
