GE ZV850 Design Information, Model Available, Product Dimensions, Required Accessory

Model Available

	Design Information
	36" Island Vent Hood
Model	This vent hood is designed to be used in
ZV850	vented ceiling mounted installations.
	NOTE: Accessories to meet proper ceiling
	height are required to complete the installation.

Required Accessory

ZX858 – For 8 ft. ceiling height.

This kit includes decorative duct covers and support frames to reach an 8 ft ceiling height. ZX859 – For 9 ft. ceiling height.

This kit includes decorative duct covers and support frames to reach an 9 ft ceiling height.

ZX8510 – For 10 ft. ceiling height.

This kit includes decorative duct covers and support frames to reach a 10 ft. ceiling height.

Order the required accessory at the same time as the vent hood and have on site before installation.

Product Dimensions

The vent hood must be installed 24” min. and 30” max. above the cooking surface. 25-1/2” is recommended for best venting performance and to insure that the duct cover meets the ceiling. The cooking surface should be at least 36” above the floor. Installation will be easier if the vent hood is installed before the cooktop and countertop is installed.

*25-1/2" Recommended

*Height to Ceiling

8-1/4"

35-3/8"

27-1/2"

*26-1/4" for 8 ft. Ceiling Using ZX858 Accessory

38-1/8" for 9 ft. Ceiling Using ZX859 Accessory

50-1/8" for 10 ft. Ceiling Using ZX8510 Accessory

	* The distance between the cooking surface and the bottom of the
36" Reference
	hood must be at least 24” and up to 30” The 25-1/2”
	recommended installation height, above the standard 36”
	countertop, will insure duct cover fit to the ceiling.

3