Step8
Install
Decorative
Duct Covers
Installation
36" Island Vent Hood
|
| Top Duct |
Pretap | Install Screw on | Cover |
Each Side |
| |
2 Screw |
|
|
Holes |
| Bottom Duct Cover |
| Top Duct | Bottom Duct |
| Cover | Cover |
Top Duct
Cover
Stop Screw
Install Stop
Screw in One
of 3 Holes
•Pretap or drive decorative screw into the screw holes on the support frame. This will make screw installation easier.
•Separate the two decorative duct covers.
•Select the inside (top) cover, which has two screw holes in the top.
•Slide the decorative duct cover over the support frame and push to the ceiling.
•Attach to the hood support at the top with 2 supplied decorative screws.
•Locate the stop screw in the envelope taped to the front of the hood. Set aside.
•Slide the bottom decorative duct over the installed top duct and push up past the stop screw hole location.
•Install the supplied temporary stop screw in one of 3 holes in the support frame or the top duct cover to prevent the bottom decorative duct cover from sliding down.
The stop screw must be installed. Failure to do so could result in personal injury or damage to the duct cover.
11