Breville BCS500XL Operating, OPERATING YOUR BREVILLE Cordless hand blender, Before first use

Models: BCS500XL

1 31
Download 31 pages 3.26 Kb
Page 5
Image 5
OPERATING

OPERATING

OPERATING YOUR BREVILLE Cordless hand blender

your Breville Cordless Hand Blender

Before first use

Remove any packaging material and promotional labels. Remove the blending shaft from the blister pack and wash the blending shaft in warm soapy water. Rinse and dry thoroughly. Ensure no water remains inside the blending shaft to avoid water ingressing into the motor body when re-attached.

Disassemble mixing jug, storage lid and smoothie attachment and wash in warm soapy water, rinse and dry thoroughly.

Ensure no water remains inside the smoothie attachment to avoid water ingressing into the motor body when re-attached.

Dishwashing is not recommended for any part of the Breville Cordless Hand Blender

Unlike stick blenders which are plugged into the power outlet for operation, the Cordless Hand Blender is safe for use in and around the sink and stove. However, care should be taken not to immerse the motor body in water or any other liquid. If using the Cordless Hand Blender as a stick blender to blend hot food in a saucepan, remove the saucepan from the heat source and ensure the liquid is not boiling. Allow hot food to cool slightly before blending. The Cordless Hand Blender should be kept away from any heat source.

The charging base is running at a safe, low voltage, but it will be damaged if immersed in water. The charging base should always be positioned in a clean, dry place well away from water or other liquids.

Charging the battery before first use

The battery in the motor body of the Cordless Hand Blender is shipped either completely discharged of power or with a small amount of charge. The battery will require approximately 5 hours to fully recharge from completely flat. The battery will require at least 2 hours recharging before it can be used effectively. Subsequent recharging should take a shorter period of time depending on the length of time the charging base has been switched off.

The Cordless Hand Blender motor body has been designed to be placed on the charging base and left on charge at all times when not in use. The Cordless Hand Blender motor body is fitted with a special protective electronic circuit to prevent overcharging. Unlike other rechargeable battery technologies, your high quality Nickel Metal Hydride (Ni-MH) cells have

a high capacity and long life. They do not need to be completely discharged before recharging.

All rechargeable batteries lose storage capacity over time. If the Cordless Hand Blender battery appears to deteriorate so that the operation time is diminished, return the unit to a Breville Service Center for battery replacement.

!THE CORDLESS HAND BLENDER IS A VERSATILE APPLIANCE
THE CORDLESS HAND BLENDER MOTOR BODY CAN BE ATTACHED TO:
THE STAINLESS STEEL

BLENDING SHAFT (FOR USE AS A STICK BLENDER).

THE SMOOTHIE ATTACHMENT

(FOR USE AS A STICK MIXER)

8

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 5
Image 5
Breville BCS500XL manual Operating, OPERATING YOUR BREVILLE Cordless hand blender, Before first use