Breville BDC550XL manual Single CUP Mode, Using the Brew Pause Feature, Empty the Coffee Basket

USING THE YOUBREW® GLASS - CARAFE MODE

USING THE YOUBREW® GLASS - SINGLE CUP MODE

b)‘BREWING’ as the coffee is dispensed into the carafe.

To stop the cycle at any time, press the START CANCEL button. You will hear a winding sound. This is normal.

CAUTION

Never open the swing-out door and remove the coffee basket while brewing. Hot water and coffee can cause injury.

6. Using the Brew Pause Feature

The Brew Pause feature temporarily ceases the flow of coffee when the carafe is removed so a cup can be poured mid-brew. Do not remove the carafe for longer than 20 seconds or the coffee may overflow the coffee basket.

7. Empty the Coffee Basket

Once the brewing cycle is complete, the ready signal will sound and a winding sound will be heard. This is normal. The coffee machine will automatically shut-off, however the LCD screen will flash ‘EMPTY COFFEE FILTER’ as a reminder to remove the coffee basket and discard the used grinds. Wash the coffee basket, taking particular care to rinse the chute area. Then dry the coffee basket and chute area thoroughly.

We also recommend checking the coffee grinds chute disc for any build-up of coffee grinds. This is the stainless steel disc that is visible when the swing-out door is opened. A build-up of grinds on this disc can affect the performance of the machine. Wipe the disc clean then dry thoroughly.

CAUTION

The coffee basket and gold tone or paper filter may still be very hot after brewing. Use caution and allow to cool before removing.

8. Warming Plate

The warming plate will automatically turn on during the brewing process. It will remain on for 2 hours after brewing is complete then automatically turn off. Alternatively, the warming plate can be turned off before 2 hours by pressing the START CANCEL button. The LCD screen will display 'WARMING PLATE ON' while the warming plate is on. Use caution as the warming plate will be hot.

CAUTION

Warming plate is hot.

CAUTION

Hot steam may rise when pouring. The bottom of the carafe is hot to touch for several minutes after brewing. Use caution. Do not set the carafe on a heat sensitive surface.

USING THE YOUBREW® Glass

- SINGLE CUP MODE

First Time Use Only

We recommend flushing the machine to remove any dust particles or residues from the manufacturing process. Follow the

instructions, ‘Using the YouBrew® Glass - Carafe Mode’, ensuring to completely fill the water tank (Step 1) and select the ‘PRE-GROUND’ coffee setting (Step 4). However do not add any coffee to the coffee basket. Once the cycle is complete, discard the water from the carafe and repeat the cycle again for best results. The machine is now ready to use.

CAUTION

We recommend using cold, filtered water. We do not recommend the use of de-mineralized or distilled water as this may affect the taste of brewed coffee and how the coffee machine is designed to function.

1. Fill the Water Tank

Press to open the flip top-lid. Pour the desired amount of cold, preferably filtered water into the tank using a jug or the provided carafe. The LCD screen will indicate the amount of water in the tank as it is filled. The machine will beep when full and the water level float will rise to indicate the maximum level. Do not exceed the 12 cup maximum. Doing so may cause water spillage at the back of the machine. Close the flip-top lid.

NOTE

Check the water level on the LCD screen before use. The water tank should be refilled with cold, preferably filtered water. Do not fill with any other liquid.

NOTE

Never pour water into the bean hopper or grinding chamber area. Doing so can cause the grinder to clog. Only re-commence use when the grinding chamber and grinding burrs are completely dry. Refer to Troubleshooting, ‘Moisture clogging grinder’, page 29.

NOTE

Never fill the water tank once the coffee machine has started a brewing cycle. This will affect the volume dispensed into the cup.

2. Pre-Warm the Cup or Travel Mug

A warm cup will help maintain the coffee’s optimal temperature and keep coffee hotter for longer. Fill the cup with hot water for about 30 seconds then discard the water. Place

the cup into position under the drip stop outlet, either on the drip tray or in the drip tray cavity (see tip below). Ensure no parts of the cup come into contact with the warming plate. The warming plate will be hot during brewing and for approximately 5 minutes after brewing and can damage non-heat resistant cups and travel mugs that are in direct contact.

DRIP TRAY

CAVITY

WARMING PLATE

CAN DAMAGE

NON-HEAT

RESISTANT CUPS.

TIP

For taller cups and travel mugs, remove the drip tray at the base of the machine. Press the OPEN button to open the swing-out door. Insert the cup/mug into the drip tray cavity before closing the swing-out door. The maximum cup/mug dimensions are 7.5" height, 2¾" diameter.

REMOVE DRIP TRAY, OPEN DOOR,

INSERT CUP, CLOSE DOOR.

16 17