Changing the ‘READY’ Signal Volume

PROGRAMMING the clock / AUTO-START (OPTIONAL)

PROGRAMMING THE CLOCK (OPTIONAL)

You must set the clock to use the Auto-Start feature. Always remember to reset the clock for time changes, power outages and when you unplug the machine.

1.Press the PROGRAM button until the LCD screen displays ‘TIME NOW’. Once this appears, press and hold the PROGRAM button until the PROGRAM button illuminates red and the LCD screen displays a flashing ‘AM’.

2.Use the and buttons to select either AM or PM.

3.Press the PROGRAM button. The LCD screen will display a flashing hour.

4.Use the and buttons to select the desired hour.

5.Press the PROGRAM button. The LCD screen will display a flashing minute.

6.Use the and buttons to select the desired minute.

TIP

For faster scrolling, press and hold the and buttons.

7.Press the PROGRAM button to finish. The LCD screen will display ‘TIME NOW’ and the programmed time.

PROGRAM

SET CLOCK

PROGRAMMING AUTO-START (OPTIONAL)

The Auto-Start feature allows you to program the specific time when the coffee machine will automatically turn on and start the preheating and grinding cycle.

1.Ensure the clock is set.

2.Press the PROGRAM button until the LCD screen displays ‘START AT’. Once this appears, press and hold the PROGRAM button until the LCD screen displays a flashing ‘AM’ or 'PM'.

3.Use the and buttons to select either AM or PM.

4.Press the PROGRAM button. The LCD screen will display a flashing hour.

5.Use the and buttons to select the desired hour.

6.Press the PROGRAM button. The LCD screen will display a flashing minute.

7.Use the and buttons to select the desired minute.

TIP

For faster scrolling, press and hold the and buttons.

8.Press the PROGRAM button. It will illuminate red and the LCD screen will display the programmed ‘START AT’ time for 5 seconds. During this time, press the START CANCEL button. The LCD screen will dim and display ‘PROGRAM ON’ to indicate

that the Auto-Start feature has been successfully turned on. If ‘PROGRAM ON’ does not appear, then the Auto-Start feature has not be activated.

NOTE

During Step 8, the programmed 'START AT' time will appear on the LCD screen for 5 seconds. If the START CANCEL button is not pressed within 5 seconds, 'TIME NOW' will appear on the LCD screen and pressing the START CANCEL button will cause the coffee machine to start grinding and brewing.

START

CANCEL

9.Ensure that the coffee machine is correctly assembled and prepared with:

•Sufficient water in the water tank and coffee beans in the bean hopper.

•The coffee basket assembled with an empty gold tone filter or paper filter (8-12 cup, flat base basket style with ~ 3¼"/8.25cm base).

•Either a cup, travel mug or carafe positioned under the drip stop outlet.

NOTE

To cancel a programmed Auto-Start, press the START CANCEL button until the LCD screen no longer displays ‘PROGRAM ON’.

NOTE

The Auto-Start feature must be selected each time you want to pre-schedule a brew. Press the PROGRAM button until the LCD screen displays ‘START AT’. The coffee machine will remember the last programmed Auto-Start time, so simply press the START CANCEL button to re-select. Ensure ‘PROGRAM ON’ is displayed on the LCD screen.

NOTE

Always remember to reset the clock and Auto-Start time when there is a time change, power outage or after you unplug the machine.