Operating your Breville ikon Grill continued

To use as a sandwich press

1.Insert the plug into a 110/120volt power outlet and switch the power on. The red power ‘On’ light will illuminate

2.Ensure the Removable Drip Tray is correctly inserted and positioned back into the appliance.

3.Ensure the top and bottom plates grill plates are securely locked into position.

4.Ensure the top plate is in the closed position for more efficient preheating.

5.Turn the Base Plate Tilt Dial to the Flat position.

6.Turn the variable heat control dial to the ‘Sandwich’ position.

7.Allow the ikon Grill to preheat until the green ‘READY’ light illuminates.

8.During this time, prepare the sandwich and place it onto the base cooking plate. Always place sandwiches towards the rear of the bottom cooking plate.

9.Close the top cooking plate which has a floating hinge that is designed to evenly press down the sandwich. The top plate must be fully lowered to cook sandwiches. The Grilling Height Control on the right hand side of the top plate is used to adjust for the thickness of the sandwich.

10.Toasting should take approximately 5-8 minutes. Exact toasting time will be a matter of preference. It will also depend on the type of bread and filling used.

11.When the sandwich is cooked, use the handle to open the top plate. Remove the sandwich using a plastic spatula. Never use metal tongs or a knife as these can cause damage to the non-stick coating of the cooking plates.

The green ‘READY’light will cycle on and off during the toasting process indicating that the correct temperature is being maintained.

Always allow the ikon Grill to preheat until the green ‘READY’ light illuminates.

Using the plate release feature

Your ikon Grill features as a plate “Release” button which allows you to separately remove the top and bottom grill plates. It also enables you to safely and conveniently wash grill plates.

Releasing the grill plates

1.After cooking allow the ikon Grill to cool down.

2.To remove the grill plates press the “Release” buttons located on the front on the top button panel. The plates will unlock from the front where they can then be released individually (See Fig 3).

3.Once released hold the plates and remove (See Fig 4).

Fig 3

Fig 4

Using the adjustable grilling height control feature

Your ikon Grill features an adjustable Grilling height control feature which allows you to fix the top plate to a range of positions above the bottom plate.

This allows your ikon Grill to be used as an open toaster ideal for toasting open sandwich style ‘melts’. It can also be used to grill delicate hamburger buns without squashing.

1.Allow the ikon Grill to preheat until the green ‘READY’ light illuminates.

2.Place the food to be grilled on the base plate.

3.Move the Adjustable Grill Control Slide on the right hand side of the smart ikon Grill to the desired height (see Fig 5).

Fig 5

4.Slowly lower the top plate until it rests in the appropriate position above the food.

ALWAYS ALLOW THE IKON GRILL PLATES TO COOL DOWN BEFORE RELEASING AND REMOVING.

ALWAYS ALLOW THE IKON GRILL PLATES TO COOL DOWN BEFORE RELEASING AND REMOVING.

FULLY UNWIND THE CORD FROM THE CORD STORAGE FACILITY BEFORE USE.

8

9