Breville BMF600XL Issue - E11 manual Operating Your Breville Milk Café, Before first use

OPERATING YOUR BREVILLE Milk Café™

OPERATING

your Breville Milk Café™

Before first use

Before first use, ensure you have all parts and accessories - power base, milk jug, latte disc, cappuccino disc, jug lid and measuring cap.

Remove and safely discard all promotional labels and packing materials attached to the Breville Milk Cafe™.

Wash the milk jug, frothing discs, lid and measuring cap in warm soapy water then rinse and dry thoroughly. Wipe the exterior of the power base with a soft damp cloth then dry thoroughly.

Frothing Hot Milk

CAPP LATTÉ

WIDER DISC END FACES DOWN

1.Place the milk frother on a flat level surface and plug the power cord into a 110V-120V power outlet. The START STOP button surround will illuminate.

NOTE

After 30 seconds of non-use, the milk frother will enter standby mode. The button surround will cease to illuminate. To reactivate, turn or press the START STOP push-dial.

2.Select the ‘Capp’ or ‘Latté’ frothing disc.

Choose the ‘Capp’ disc for thick and creamy froth or the ‘Latté’ disc for smooth and silky milk.

3.Insert the frothing disc onto the shaft at the base of the milk jug. Ensure the disc is inserted the correct way with the wider part of the disc at the bottom of the jug. The disc should ‘click’ securely onto the shaft.

NOTE

If the disc is not inserted correctly it may dislodge during operation, a grinding noise may be heard, or milk will not swirl.

Do not operate the milk frother without a frothing disc inserted into the milk jug as this can cause uneven heating and burning.

WARNING

Frothing disc is a choking hazard. Children must always be supervised and never left unattended with the appliance.

11