Operating your Breville product
1.Wash your selection of fruit and vegetables ready for juicing.
NOTE
Most fruit and vegetables such as apples, carrots and cucumbers will not need to be cut to size as these will fit into the feed chute whole. When juicing carrots place the tip of the carrot into the feed chute last.
2.Ensure the juicer is correctly assembled. Ensure the Stainless Steel Filter is thoroughly cleaned before each use. Ensure you place the Juice Jug under spout before commencing juicing.
3.Plug the power cord into a 110 or 120V power outlet. Flip the
4.With the motor running, place food into the Feed Chute. Using the Food Pusher, gently guide food down the Feed Chute. To extract the maximum amount of juice, always push the Food Pusher down slowly.
5.Juice will flow into the Juice Jug and the separated pulp will accumulate in the Pulp Container.
WARNING
Never use fingers to push food down the feed chute or clear the feed chute. Always use food pusher provided.
NOTE
The Pulp Container can be emptied during juicing by turning the Juicer OFF and then carefully removing the Pulp Container. (Replace empty Pulp Container before continuing to juice). Do not allow the Pulp Container to overfill as this may prevent correct operation or damage the unit.
HINT
To minimize clean up, place a produce bag into the Pulp Container to collect the pulp.
Overload Protection Button
The Breville juicer is fitted with a safety device which safeguards against overheating with excessive loads. If this occurs, the juicer will automatically activate the overload protection button and the unit will turn itself off. If this occurs unplug the Juicer from the power outlet and allow the unit to cool. Then press the Overload Protection Button found on the bottom of the Motor Base. The safety device will then be reset and the juicer is ready for use again.
13
