OPERATING YOUR BREVILLE JUICE FOUNTAIN
STEP 1.
Wash your selection of fruit and vegetables
ready for juicing.
Most fruit and vegetables such as apples, carrots and cucumbers will not need to be cut to size as these will fit into the feed chute whole. When juicing carrots place the tip of the carrot into the feed chute last.
STEP 2.
Ensure the Juice Fountain is correctly assembled. Ensure the stainless steel filter is thoroughly cleaned before each use (refer to care and cleaning on page 14). Ensure you place the juice jug (or a glass) under the spout before commencing juicing.
STEP 3.
Plug the power cord into a 230/240v power outlet and turn the power 'On'. Push the Two Speed switch either up for low speed or down for high speed depending on the type of fruit or vegetable being juiced. Use the speed selector table as a guide for juicing different fruits and vegetables.
SPEED SELECTOR TABLE
Apples | High |
Apricots (stone removed) | Low |
Beetroot | High |
Blueberries | Low |
Broccoli | Low |
Brussels sprouts | High |
Cabbage | Low |
Carrots | High |
Cauliflower | Low |
Celery | High |
Cucumber | Low |
Fennel | High |
Grapes (seedless) | Low |
Kiwi fruit | Low |
Mangoes | Low |
Melons | Low |
Nectarines (stone removed) | Low |
Oranges (peeled) | High or Low |
Peaches (stone removed) | Low |
Pears | High for hard |
| or Low for soft |
Pineapple (peeled) | High |
Plums (stone removed) | Low |
Raspberries | Low |
Tomatoes | Low |
Watermelon | Low |
|
|
WHEN USING THE JUICE FOUNTAIN ON HIGH SPEED, DO NOT RUN THE JUICER CONTINUOUSLY FOR LONGER THAN 4 MINUTES AT A TIME WHEN JUICING HARD FRUITS AND VEGETABLES, SUCH AS APPLES, CARROTS, AND BEETROOT. AFTER SUCH TIME, SWITCH THE JUICE FOUNTAIN PROFESSIONAL "OFF" FOR APPROXIMATELY 1 MINUTE BEFORE YOU
10RESUME JUICING.
