Briggs & Stratton PRO6500 owner manual Assembly, Remove Generator From Carton, Install Wheel Kit

Models: PRO6500

1 56
Download 56 pages 7.7 Kb
Page 6
Image 6

BSPP Generator

ASSEMBLY

The generator

 

 

Generator owner’s manuals

Your generator requires some assembly and is ready for

Engine owner’s manuals

use after it has been properly serviced with the

(2) Locking 30A plugs

recommended oil and fuel.

Battery charge cables

If you have any problems with the assembly of your

Engine oil

generator, please call the generator helpline at

Wheel kit

1-800-743-4115.

 

 

Remove Generator From Carton

1.Set carton on a rigid flat surface with “This Side Up” arrows pointing upward.

2.Carefully open top flaps of shipping carton.

3.Cut down corners at one end of carton from top to bottom and lay that side of carton down flat.

4.Remove all packing material, carton fillers, etc.

5.Remove generator from shipping carton.

Install Wheel Kit

The wheel kit is designed to greatly improve the portability of your generator.

NOTE: Wheel kit is not intended for over-the-road use.

You will need a 1/2" or 13mm socket wrench and a 1/2" or 13mm open end wrench and a 7/16" socket wrench and 7/16" open end wrench and a needle-nose pliers to install this kit.

NOTE: Adjustable wrenches may be substituted for open end wrenches.

Carton Contents

Check all contents. If any parts are missing or damaged, call the generator helpline at 1–800–743–4115.

Refer to Figure 1 and install the wheel kit as follows:

1.Place the bottom of the generator frame on a flat, even surface.Temporarily place unit on blocks to ease assembly.

Figure 1 — Install Wheel Kit

Handle Pin

Nylon Washer

Nylon Washer

45 mm Cap Screw Flat Washer

Nut

Your unit may vary slightly from that shown here

Wheel

Handle

Use existing hardware to attach left side of support leg to unit

Nut

Flat Washer

Axle

20 mm Cap Screw

Vibration Mount

Support Leg

 

E-Ring

 

 

 

3/4” Cap Screw

Nut

6

Page 6
Image 6
Briggs & Stratton PRO6500 owner manual Assembly, Remove Generator From Carton, Install Wheel Kit, Carton Contents