Choose a good, cleared assembly
area and get a friend to help you put
your grill together.Lay cardboard
down to protect grill finish and
assembly area.
CAUTION! Some parts may
contain sharp edges.
Wear protective
gloves if necessary.
Step 1
Attach cart base to left and right
panel assemblies using four
M6 X 45mm bolts through the
legs and into the base, hand
tighten only.
Step 2
Attach tank holder onto cart base by
using three M6 X 12mm bolts.
Step 3
Attach the back panel to the rear
legs by using four M6 X 12mm
bolts.Then attach top of tank bar to
the top of the cart back panel using
one M6 X 12mm bolts. Attach door
stop and the bottom of the tank bar
to the cart base by using two
M6 X 12mm bolts.
Note: With the help of a friend, turn
the cart assembly over.Try to
minimize the stress to the
legs.
Step 4
Attach locking casters to the bottom
of the left and right side cart panels.
Tighten caster bolts securely using
hex nut wrench provided in parts
card.
26