Brinkmann Charcoal/Wood Smoker owner manual Step

Step 15

Attach wooden handle halves to metal bracket as shown. Fasten one handle to firebox lid and the other handle to cooking chamber lid.

4" Lock

Washer

10-24 Screws

Step 16

Fasten the four shelf brackets to the outside front of the cooking chamber and four grill support brackets to the inside using 4" x w" bolts, washers and nuts as illustrated.

Step 17

Attach the two grill support brackets to inside front of firebox using 4" x w" bolts, washers and nuts.

Step 18

Insert the four 4" x 12" grill support bolts into the pre-drilled holes in the back of the cooking chamber and secure with nuts.

Step 19

Insert the two 4" x 12" grill support bolts into the pre-drilled holes in the back of firebox and secure with nuts.

Step 20

Take one wooden shelf slat and align holes with shelf bracket holes and attach with 3⁄16" x 12" carriage bolts and nuts. Repeat this procedure with the other wooden shelf slat.

Step 21

Place the charcoal grate in firebox allowing it to rest on the sides of firebox.

Step 22

Place cooking grills on top of grill support bolts and brackets in cooking chamber.

Step 23

If you have purchased a smoker without a temperature gauge, insert chrome push plug into hole in lid of cooking chamber. If the temperature gauge is included, remove tightening ring from gauge. Drop probe through hole and re-thread tightening ring.

Cooking Chamber

3⁄16" x 12"

Wooden	Carriage Bolt
		Grill Support
Shelf Slat	Grill Support
		Bolt
	Bracket

Shelf

Bracket

Inside of Cooking

Chamber

Firebox

Charcoal

Grate

Chrome	Temperature
Push Plug	Gauge

Cooking

Chamber Cooking

Chamber

7